Intex PureSpa Bubble Massage 4-Person Round Inflatable Hot Tub Tan

• 196 cm round spa body with room for up to 4 adults
• 120 Bubble Jets release from the base for an all-over bubbling massage effect
• Heats from 20°C to 40°C with an approximate rise of 1.5 to 2.5°C per hour
• Built in hard water treatment system helps reduce calcium build-up and can improve heat efficiency
• Fiber Tech internal construction and 3 layer laminated walls give the spa a more supportive feel
• Separate control unit handles heating, bubbling, filtration and water treatment
• Includes a top cover, inflatable cover bladder and ground cloth for a more complete setup
• Comes with 2 filter cartridges, a floating chemical dispenser and test strips
• Warm tan finish gives it a softer, less clinical look in outdoor spaces

✓ Spacious enough to feel like a proper spa, while still manageable for many terraces and outdoor areas
✓ Built in hard water treatment and the included cover setup make day to day ownership easier

What’s included in the box

• Inflatable spa tub
• Separate control unit
• Inflation hose
• Top cover
• Inflatable cover bladder
• Ground cloth
• 2 x filter cartridges
• Floating chemical dispenser
• Test strips

Technical Information & Important Notes

Approx. filled weight

• Water capacity: 795 litres (approx. 795 kg of water)
• Approx. total weight when filled without bathers: around 840 kg

Ensure the installation surface can fully support this weight, especially on terraces, rooftops, raised platforms or decking.

Electrical requirements

• Supply: 220 to 240 V, 50 Hz, 1 phase
• Heater: approx. 2,200 W
• Bubble air blower: approx. 800 W
• Filter pump capacity: 1,741 L/h
• Requires a dedicated, earthed 13A socket with RCD protection
• Do not use extension leads

Specifications

• Model: 28426
• Seating capacity: 4 adults
• Shape: Round
• Outside diameter: 196 cm
• Inside diameter: 145 cm
• Height: 71 cm
• Water temperature range: 20°C to 40°C
• Heating rate: approx. 1.5 to 2.5°C per hour
• Bubble Jets: 120
• Package weight: approx. 43.4 kg

• Install on a flat, level, water resistant surface free from sharp objects
• Important: check that the installation surface can safely support the approximate filled weight of around 840 kg before setup
• Keep the cover and inflatable cover bladder in place when not in use to help retain heat
• Clean or replace the filter cartridges regularly for the best flow and water clarity
• Always measure your space carefully and allow room for the separate control unit as well as access around the spa